SKU: 95753750922

womo markise abspannen

womo markise abspannen Camping Markise

Name: womo markise abspannen Camping Markise
Brand: virkons.nl
SKU: 95753750922
Price: 24.60 USD
Availability: InStock
Rating: 4.5886000000000005 (1423 reviews)

$22.14 $24.60

Save 10%

No.2 Bestseller on virkons.nl >

Pay in installments of $6.15 with , and

Shipping Estimate
USA

USA

CAN

Ships within 48 hours · Estimated delivery Jun 29 - Jul 4

Description

womo markise abspannen Camping MarkiseDeine Camper & Go Markise Diese einzigartige, sttzenlose Markise spart dir Zeit und Stress. Ankommen, parken, und keine zwei Minuten spter im Schatten chillen! Du kennst die Camper & Go Markise noch nicht? Hier gibt es alle Infos! Produktbeschreibung Was macht die Camper & Go Markise so einzigartig? Funktioniert ohne Sttzen, ohne Schnre, ohne Stress. Nie wieder ber die eigenen Heringe stolpern! Sie ist super leicht und nimmt wenig Platz im Camper weg!

Deine Camper & Go Markise

Diese einzigartige, stützenlose Markise spart dir Zeit und Stress. Ankommen, parken, und keine zwei Minuten später im Schatten chillen!

Du kennst die Camper & Go Markise noch nicht? Hier gibt es alle Infos!

Produktbeschreibung

Was macht die Camper & Go Markise so einzigartig?

Funktioniert ohne Stützen, ohne Schnüre, ohne Stress. Nie wieder über die eigenen Heringe stolpern!
Sie ist super leicht und nimmt wenig Platz im Camper weg!
Abgebaut quasi unsichtbar. Du hast keinen hässlichen, schweren Kasten am Fahrzeug!
Sie ist aufgebaut in 90 Sekunden - Abbauen geht noch schneller!
100% Schatten - klingt selbstverständlich? Hier ist es wirklich so!
Wasserdicht - logisch!
Wasser läuft einfach ab und bildet keinen schweren "Wassersack"!
Bei Wind und Regen kannst du ganz entspannt bleiben. Die Markise hält! Zugelassen bis max. 25km/h.

Ist die Markise für mich geeignet?

Grundsätzliche Voraussetzungen:

Dein Dachträger (falls schon vorhanden) sollte stabil genug sein.
In speziellen Fällen geht es auch ohne Dachträger. Zum Beispiel per Verschraubung mittels Adapter funktioniert die stützenlose Markise auch ohne Dachträger. (z.B. Adapter No. 06)
Bei der Installation deiner Camper & Go Markise müssen die beiden Markisenaufnahmen, von Lochmitte zu Lochmitte, im exakten Abstand zu einander installiert werden. Der Abstand entspricht deiner Markisenauswahl.
Werkzeug, Knowhow, oder ein Fachmann für die Installation sind selbstverständlich.

Bitte schau dir auch unbedingt dieses Video komplett an! Darin beantworte ich fast alle Fragen zu Aufbau, Anbindung, und was sonst noch wichtig ist...
Sollten trotzdem Unklarheiten bestehen, oder du weitere Hilfe brauchen, melde dich bei mir.
Ich versuche sehr gern dir zu helfen, damit du auch endlich eine großartige Markise ohne Stützen bekommst!

Was ist mit Wind?

Die Markise hält so einiges aus, aber sie ist nicht unzerstörbar.

Die Markise ist bis 25 km/h Windgeschwindigkeit zugelassen. Darüber ist die Markise abzubauen. Informiere dich über das Wetter vor Ort. Besonders an der See können spontan heftige Böen auftreten.

Die Markise darf nur unter Aufsicht betrieben werden. Beim Verlassen des Zugriffsbereiches ist die Markise abzubauen.

Schau dir einfach diese Video an.

Wie befestige ich das?

Grundsätzlich ist die Installation super einfach.

Alles was du tun musst, egal wo du die Markise installieren möchtest: du musst die beiden Markisenaufnahmen parallel zueinander im richtigen Abstand befestigen. Das ist alles.
Dafür habe ich einige Lösungen und Adapter entwickelt, die dir verschiedenste Konstruktionen ermöglicht.

Grundsätzlicher Abstand der Markisenhalterungen:

Egal für welche Installation du dich entscheidest. Du must den angegebenen Abstand exakt einhalten. Zu wenig Abstand, dann hängt die Markise durch. Zu viel Abstand, dann ist das ganze System zu sehr gespannt. Beides führt dazu, dass die Markise schneller verschleißt, oder nicht richtig arbeitet.
Solltest du ein Sondermaß benötigen, lass uns telefonieren - bestimmt finden wir eine Lösung.

Befestigung der Markisenaufnahme:

Die Markisenaufnahme und die Stofflasche installierst du vorne mit je zwei M6 Schrauben am Camper & Go Dachträgerfuß, oder dem Adapter. Hinten wird die Markisenaufnahme mit je einer M8 Schrauben und der entsprechenden Schraublasche befestigt. Diese werden dann dann am Aluprofil, oder dem Dachträger verschraubt.

Hier habe ich dir Video zu dem Thema gemacht: Hier klicken. Auf meinem Kanal findest du auch noch weitere Videos zum Aufbau.

Installation an Camper & Go Dachträgernfüßen:

Die Installation der Markisenaufnahme erfolgt vorne mit je 2x M6 Schrauben und hinten mit Schraublasche S 01.
Für die Standard Dachträger (Anschraubpunkte, C-Schine, Airline-Schiene, Fixpunkte) benötigst du die Markisenaufnahme 2° Standard. Für die Regenrinnendachträger benötigst du die 13° Spezial-Halterung. Mehr Infos dazu findest du bei den entsprechenden Dachträgerfüßen.

Instalation mittels Adapter:

Falls du mit den Dachträgerfüßen nicht auf die exakten Maße kommst, oder an einen anderen Dachträger bauen willst, helfen dir die entsprechenden Adapter.

Wichtig!

Der Anbau sollte durch qualifiziertes Fachpersonal erfolgen! Im eigenen Interesse und zum Schutz anderer muss alles sicher und stabil sein! Safety First!
Ich übernehme keinerlei Haftung für unsachgemäße Befestigung oder Eigenkonstruktionen!

Lieferumfang | Nutzerinformationen | Herstellerangaben

2x Markisenaufnahmen - Edelstahl
2x Stoffbefestigungslasche - Edelstahl
2x teleskopierbare Carbonstangen (CFK/GFK)
1x Markisenbespannung inkl. Befestigungsmaterial
Schrauben - Edelstahl schwarz (4xM6, 2xM8)
2x Sicherheits-Anhänger

Leg dir am Besten gleich die benötigten Adapter, Schraublaschen oder Dachträger in den Warenkorb.

Technische Daten & Pflege

Markisenaufnahme
Material: Edelstahl
Gewicht inkl. Anbauteile: 1990g (2Stück)

Stangen
Material: CFK
Gewicht inkl. Beutel: 1260g (2 Stück)

Markisenstoff | Befestigung
Material Markise: Nylon/Polyester
Wassersäule 5000mm
Gewicht inkl. Anbauteile und Beutel: 350g (220cm) / 380g (250cm) / 430g (300cm)

Gesamtgewicht
ca. 3,7 kg

Pflegehinweise

Stoff

Bitte stets trocken verstauen. Wenn der Stoff naß verpackt wird kann es zu Stockflecken kommen und die Beschichtung kann Schaden nehmen. Das führt zu einer Wasserdurchlässigkeit. Also: Wenn's mal regnet und man schnell alles zusammenpackt: den Stoff einfach bei der nächst möglichen Gelegenheit nochmal auspacken und ordentlich trocknen lassen.

Stangen

Die Stangen sollten stets sauber gehalten werden. Wenn die Stangen mit Staub und Dreck bedeckt sind, können diese durch Kratzer verschleißen. Die Klemmung der Teleskopauszüge kann leiden und die Stabilität kann abnehmen. Hier empfehle ich einen besonders sorgsamen Umgang und eine Reinigung mit einem sauberen Tuch nach jedem Gebrauch, um Staub und Dreck zu entfernen. Also mit einem sauberen Tuch abreiben und sie erst dann zusammenschieben.

Allgemein

Reinigung mit Wasser und sauberem Tuch. Keine scharfen Reiniger, Alkohol oder Bremsenreiniger verwenden. Stoff nicht in der Waschmaschine waschen.

Gewährleistung & Rücknahme

Jegliche Rücknahme und Haftung ist bei diesem Produkt ausgeschlossen, sobald du irgendetwas an den gelieferten Teilen bearbeitet hast.

Die Stangen sind vom Umtausch ausgeschlossen, sobald sie einmal in Gebrauch waren, da eine unsachgemäße Bedienung nicht ausgeschlossen werden kann.

Hier findes du die Bedienungsanleitung: Klick!

Hersteller nach GPSR
Camper&Go - Mirko Frank
Dammstr. 30
75382 Althengstett
www.camper-and-go.com

Shipping Notes

Free Standard Shipping on $100+ Orders to the USA.
Except Preorder products are shipped in 48 hours.
Delivery to the USA:

Standard Shipping : 3-10 business days

If time is of the essence, please consider selecting expedited delivery for faster service.

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

Discover Niche Categories That Outsell womo markise abspannen

Top-Converting Item to Boost Your Average Order

Best in 7 days

Camping Markise

US$ 29.30

Sold : Login>>

Best in 7 days

Camping Markise

US$ 25.32

Sold : Login>>

Best in 7 days

Camping Markise

US$ 28.10

Sold : Login>>

Best in 7 days

Thule Hold Down Kit Sturmsicherung

US$ 23.06

Sold : Login>>

Best in 7 days

Thule Hold Down Kit Sturmsicherung

US$ 23.39

Sold : Login>>

Sort

Product Reviews

Verified Purchase

Grong 1969

Bozeman, US

★★★★★ 5

Sturdy and super strong

Color: Black-Mount

This product is very well made heavy duty no plastic parts basically all metal less than 1 % plastic. Pro's holds monitors easily and one of mine weights 19.8 pounds according to the manufacture and the other one without stand that came with it weights 25 pounds don't know what they were thinking when they built that one hard to find arms to support that. But this arm system takes it like a pro yes you have to pay attention to which way you turn the adjustment screws but they are clearly marked. Had no problem assembling it or putting it together two installs one for a clamp on the edge one for a hole. I used the edge clamp and that beast is not coming off. I did tighten one side and then the other went back and forth between the two main screws until I got them equally tight to insure the monitors would not fall. They cost way more than this arm system. Cons: There are 4 screws that hold the plate that holds the clamp screws plate. They are preinstalled and slip into a hole and slot configuration. Remove them completely and throw them out go to your local hardware store and get hardened screws they cost me about sixty cents apiece. I also got some washers and put them on the replacement bolts and affixed them so that the slot holes are basically just regular holes. I pushed the new screws down on the slot position and tightened. Now anyone that reads this I know is asking why? I'm 60 plus years old not a he-man or body builder never been actually been on the lighter side of strength. Not that I'm weak but in my day I have busted and broke things by overtightening those days are sadly gone. I did not use any extention or more commonly called a cheater bar on the allen wrench but 2 of the 4 screw heads stripped out and had to be removed with pliers. I also tried my set of allen wrenches on the screws thinking maybe cheap allen wrench no it was the screws that head that was I suspect too soft and it rounded out. Just pliers not vise grips so they were not terribly tight. I did not have to retap the holes so they were not cross threaded. 1 out of four that failed could be called a bad screw 2 out of four are cheap and not worth using and for that reason since they are a critical part of the clamp locking system I decided to get hardened screws which will probably not strip out or break the threads in the plate would probably tear out first and that would take some real doing. Outside of those screws and the expected failure of the cable holding plastic part that sits on the back of the clamp to hold cables and makes a nice place to store the allen keys to adjust the arm if needed that was a nice touch this thing is rock solid. Solution for the plastic cable holding part is simple a cable tie holds that in place yes it maybe a touch tacky but oh well hang me for wanting it to stay in place. Yes, I would recommend this to someone and have Yes, I think it is a good value Yes, I think it is going to last a long time and the gas shocks seem to be strong Yes, I would buy this again. No, I do not think the problem I had should deter anyone from buying this just be aware that these screws might be soft and probably should be upgraded before assembling this thing the first time. I would if the manufacture reads this recommend that they take a real good look at those screws and maybe see about getting a better grade. No I do not blame them they buy stuff and maybe not even be aware that the screws have a fair possibility of stripping out. But when someone puts $800.00 plus dollars on this it would really be stupid to have the problem I had and trust the other 2 screws to hold since I could not get 2 of them to tighten enough to take the wiggle out of the assembly.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on May 7, 2020

Verified Purchase

JRF

Charlottesville, US

★★★★★ 4

Cord installation is difficult but works overall

Color: White-Mount

I have 2 monitors (27” and 24”) that I attached to my Pottery Barn corner desk with the c-clamp. The installation wasn’t that difficult - at first. Then I had to store the cords and wires and the plastic backing on the arms ALMOST burst at the seams trying to hold all of them. My husband and Dad had to step in and help me get the plastic backing on the arms WHILE holding the cords in place. Once the installation was complete it worked perfectly fine. I’ve had it for 2 weeks and no issues to date. Additionally the manufacturer assumed that everyone has a CPU when MOST people use laptops because the plugs for the USB ports are attached to the backend of the device. Now I have to find a way to hide the cords. It’s a great product that is strong and seems like it will last.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on August 11, 2020

Verified Purchase

Teresa Weaver

Lexington, US

★★★★★ 5

Great Dual Monitor Mount

Color: White-Mount

I bought this dual monitor arm desk mount for my wife’s computer to mount two 32” monitors. Unpacking and installation were fairly straight forward. The only two issues I had were: 1). Instructions state that this mount can be installed using a grommet hole in a desk to secure it to the desk. However, most grommet holes in desks (at least in the United States) are 2” holes. The grommet mounting option uses two all-thread bolts screwed into the base, but the outside spacing of the bolts is about 2-1/4” which, of course, is too big for 2” grommet holes. I ended up drilling two smaller holes in the desk, one for each all-thread bolt. On the plus side, this option secures the mount to the desk very securely. 2). There is no guidance in the installation instructions for optimal placement of the arm mount on the desk. I ended up temporarily installing the lower set of arms on the mount base and then experimented moving the base around the desk while swinging the arms to make sure they would clear all computer and other equipment on the desk as well as the walls. This method worked well and final placement clears everything while still giving full articulation of both arms. The unit is very heavy-duty and quality is excellent. Other than the two items mentioned above I am very impressed with this product. After installing this unit on my wife’s desk, and playing with it for a few days, I ordered one for my desk. Because of the two issues above I would give this 4-1/2 stars if I could. But these smaller issues are not enough for me to lower my rating to 4 stars, so 5 stars it is.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on January 20, 2021

Verified Purchase

Michelle L.

Natrona Heights, US

★★★★★ 5

Great Looking and Sturdy Monitor Arms

Color: White-Mount, Color: White-Mount

I'm so impressed with these arms. They're super strong and sturdy holding up my 27" monitor and 34" ultrawide monitor. Setting up for the most part is pretty simple and easy. One of the best things I like about these arms is the cable management. I had several arms before for my setup at home and work, and the cable covers are usually pretty flimsy and just slide and lock in. I have a lot DP and HDMI cables due to my dual workstation, so these cable covers often end up popping out since its so full. These cable covers are different since they are screwed down tight with a bolt. All my cables fit pretty snug, but there is no bulging and I don't have to worry about the covers popping off ever again. I'd recommend keeping it at a maximum of 4 thicker cables though. However, fair warning that attaching the covers can be a pain so if you have to detach cables often, the screwed in covers can be a problem. If you have a set up like mine that won't really change often, it works well. If you can, I would suggest having 2 people set up the cable management. One to hold down the cover in place and the other to screw it in. I did it myself just fine though. The range of motion is great for my needs, but please note that I tried stacking my monitors and it didn't quite work. I would say it's 1 to 2 inches shy of properly stacking them. Overall, a great looking set of dual monitor arms. The extra ports on the base are a cool feature that do work, but I haven't had much use of it yet. Love that they had a white option to match my set up too. These are a little pricey, but they're really worth it!

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on February 21, 2021

Verified Purchase

Jorge Roman

Grantham, US

★★★★★ 5

You will be hard pressed to find an equal or better product regardless of the price.

Color: Black-Mount, Color: Black-Mount

Review of AVLT Dual 13"-35" Monitor Arm Desk Mount I do not usually rate items, except for products that are exceptional or are provided by a vendor that is above all others. I looked at this item several times, because the price was $100 less than my five year old dual arm could not raise the 38” monitor more that 8” from the desk surface and barely keep my wiring hidden. Finally, the website for AVLT convinced me to place the order for the AVLT-DM41-1, Dual 13"-35" Monitor Arm Desk Mount. I was not disappointed. The quality and finish of the aluminum mount is space age quality, the manual acceptable (ilea type); most important the I can raise my 38” monitor to a perfect ergonomic height. My monitors are a Dell 38” U3818DW, (larger than 13” to 35” range) and a Dell 24” U2412M, U. for each I use the factory power cable, DP to DP display port 6 foot cables and high speed USB 3 cables for each monitor. The assembly went without a hitch, no problem hiding the heavy cables that I use, my only problem was that my was not a C-clamp, attaching the hex bolts to the base from the underside of my desk was difficult; t would had been easier had they used a stud bolts to clamp the unit down. The arm springs had no problem supporting my 38” monito, the unit is so sturdy I expect to receive years of service. I strongly recommend this item because of value, quality and design. You will be hard pressed to find an equal or better product regardless of the price.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on October 10, 2020